• Home
Cart: Item(s) |

Automatic Hand Dryer Automatic Graphite Black Commercial Quick Dry Sensor

Rate this item
(0 votes)

Click for larger image.
  • Price: $249.99
  • UPC: 662712427959
  • In Stock: 1
Quantity:

Key Features

  • 95% cheaper than Paper Towels
  • Plug and play ready to use upon arrival
  • 5 minute install
  • Super powerful - Drys hands in 8-14 seconds

Product Description

95% cost savings vs paper towels Will Dry hands completely in 8-14 seconds 110v- works with standard USA plug Plug and play ready to operate upon arrival - no assembly required DIMENSIONS - 12' X 12' X 6.75' INCHES 16 LBS Hand dryer cover is a heavy duty one piece, rib-reinforced, die-cast zinc alloy. It is , unbreakable, rustproof, lightweight and all exposed surfaces shall be bright Graphite Black chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate is equipped with (3) 7/8" (22 mm) diameter holes, one that is suitable for use with surface conduit, for ease of wiring. Standard 3 prong cord included Easy to mount Entire mechanism shall be internally grounded. Internals Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet.

 

hai

Contact Us:

Heliconnect, Richmond, British Columbia

Copyright © 2015 Heliconnect. All Rights Reserved.